Home > Gun Type > AR-15 Products > Tactical Handguards > Combat Rails >

MI-CRM15
MI Combat Rail One Piece Free Float Handguard, M-LOK(TM) compatible

MI-CRM15<br> MI Combat Rail One Piece Free Float Handguard, M-LOK(TM) compatible


 
Alternative Views:


Our Price: $209.95

Stock Status:In Stock

Product Code: MI-CRM15
Qty:

 
  • 4140 Heat Treated Barrel Nut
  • Barrel Nut and Wrench Included
  • Features Patented 4140 Heat Treated Torque Plate
  • 15" overall length
  • 11.4 oz Installed Weight
  • 6061 Aluminum Type 3 Hard Coat Anodized
  • Continuous MIL-STD 1913 Picatinny Top rail
  • Two Integral Anti-Rotation QD Sling Sockets
  • Super Slim 1.5” Outside and 1.3” Inside Diameter
  • Seven Sides of M-Lok
  • 5-Slot Polymer M-Lok rail included
  • Fully Dehorned and Deburred
  • 100% Made in USA- Keeps America Working
  • MI Lifetime Warranty

Optional Titanium Barrel Nut and Titanium Clamp Screws Available for Purchase


IMPORTANT COMPATIBILTY NOTES!

Due to the many different dimensions in BILLET UPPER RECEIVERS on the market, please contact your billet upper receiver manufacture to insure fit of this handguard. This handguard is compatible with standard forged upper receivers.
NOT FOR USE ON GAS PISTON AR’s!

Magpul(R) and M-LOK(TM) are trademarks of Magpul Industries Corp
Installation of the Midwest Industries Combat Rail

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 10 Write a review »

  1 of 1 people found the following review helpful:
 
5 of 5 Great Rails May 14, 2021
Reviewer: Conner Denigan from Kennett Square, PA United States  
I have Midwest rails on 3 of my guns. The Combat Rail is nice and slim, great for shooting with a C-clamp hold or using an angled foregrip. Barrel nut is simple to install and the rail clamps on solid. Mine have taken a serious beating and have not moved or bent at all.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Super easy system! February 4, 2021
Reviewer: Ryan Young from Thurman, OH United States  
The low profile barrel nut and mounting tab makes these so easy to install. Nothing to worry about lining up with the gas tube, just torque it and go. High quality and great finish as well. I’ve purchased 2 of them now and will be getting more.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Solid January 28, 2021
Reviewer: Anonymous Person from Auburn, AL  
Very, nice fit and finish.  Feels fairly light for such a long handguard.  I'm grateful that it did NOT require heat to mount the handguard onto the barrel nut too.  So far, so good.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Excellent Handguard! January 4, 2021
Reviewer: Anonymous Person from Austin, TX United States  
Used this for my first AR build and was surprised how easy it was to install. Its also one of the best looking handguards and feels really slim and good on the hands

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Good product, great customer service June 25, 2020
Reviewer: Kelsey from WA United States  
Got this handguard because I really liked the look and feel of it. Went to install it myself, and followed the instructions for torque for the rear locking screws; I think my friends torque wrench must have been broken because I ended up reefing down on the screws... When I went to take it apart later to adjust the gas block, I saw I had completely mangled the threaded inserts (pro tip: if in doubt, ignore the torque spec and tighten to just snug- do not over tighten!!). In any case, I let MI know of the problem and asked if I could get new thread inserts. They said the easiest way to handle the problem was to send the whole handguard back- and I was amazed at how quickly they turned around a new part to me!! (seemed like less than a week!) Thanks MI!!!

Was this review helpful to you?

View All Customer Reviews