Home > Accessories > Cleaning Supplies & Tools > Tools >

MI-308URR
MI Upper Receiver Rod .308

MI-308URR<br>MI Upper Receiver Rod .308


 
Our Price: $124.95

Stock Status:(Out of Stock)

Product Code: MI-308URR
Qty:

 

MI-308URR - MI Upper Receiver Rod For .308

  • Works with LR308 and AR10 308 barrels and receivers
  • Ultimate tool for barrel nut installs or removal
  • Excellent for removing stubborn/seized barrel nuts without damaging upper
  • Designed for muzzle device installs and will not damage index pin
  • Can be used to install forward assist/port door cover
  • Compatible with forged and billet LR308 and AR10 upper receivers
  • Machined from 4140 Ordnance grade steel
  • Durable Black Oxide finished for years of use
  • Will not mar or damage exterior of upper receiver
  • Receiver mounted sights can be left installed
  • Can be installed horizontally or vertically in bench vise


100% Made in USA

*NOT COMPATIBLE WITH DPMS G2 308

ArmaLite(R) and AR10(TM) are trademarks of Armalite Inc


Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Great tool! March 27, 2020
Reviewer: Ethan from Sequim, WA United States  
Love the tool! I'm using it to build my first AR10 using an Aero M5 upper and a Faxon match barrel. This tool fits these components perfectly. The removable tongue feature on top of the rod is something to appreciate; it adds extra support and reduces torque stress on the barrel extension lugs when cranking on a barrel nut or muzzle device. When removed, it enables a person to quickly or intermittently rotate the upper assembly without unlocking the tool from the vise in order to rotate it. As with other Midwest industries products, this rod is made of quality material and craftsmanship. One thing that would improve this tool, is if it came with a bottom plug feature like that of the Real Avid Lug Lock rod.  This would enable the upper receiver to be locked in place and prevent it from sliding forward on the rod; a major benefit when removing a tight fitting hand guard or gas block. Nonetheless, I still give this tool a 5 star rating and recommend it to others!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Best Upper Receiver Rod! January 10, 2020
Reviewer: Jim Laxton from Colleyville, TX United States  
I used this for my POF 308 upper receiver.  It locks in with the barrel lug and fits tight in the receiver.  This is the best tool I have found for removing or tightening barrel nuts and muzzle devices on my AR10.

Was this review helpful to you?

  5 of 5 people found the following review helpful:
 
5 of 5 Best designed Receiver Rod January 30, 2019
Reviewer: bfoosh006 from United States  
I have tried the other brands... the Midwest Receiver Rod is the best one I have used out of the bunch.

The Brownells sucked because of no vise flats...and frankly is a little to short.

The Geiselle was a big step up because of the vise flats and added OAL... but without the charging handle valley that Midwest has... it would tend to spin if I didn't keep it in the correct position.. and if it would shift ( downward ) while in the vise, I had a few uppers bonk to the ground. Sure my fault, but still annoying.

The Midwest, with its CH valley addition, makes for a much stronger setup... allowing me to remove that one stubborn barrel nut, that I wasn't comfortable doing with the Geissele rod just holding onto the receiver extension.

In other words ... the added CH valley portion adds considerable support.

Wish the Midwest version had been available when I bought the other 2 brands... because I wouldn't have wasted money on those.

Was this review helpful to you?