Home > Gun Type > MI Products for Ruger® > Midwest Industries Inc Products for Ruger® PC Carbine™ >

MI Extended M-Lok™ 14" Hand Guard Compatible with Ruger® PC Carbine™

MI-CRPC9X<br>MI Extended M-Lok™ 14" Hand Guard Compatible with Ruger® PC Carbine™

Alternative Views:

Our Price: $184.95

Stock Status:In Stock

Product Code: MI-CRPC9X


  • Lightweight design with a slim profile
  • Mounting bolt and wrench included
  • 14.0" overall length
  • Three built in anti-rotation QD sockets
  • Features 8 sides of M-Lok™ slots
  • 5-slot polymer M-Lok™ rail included
  • Weight 11.9 oz installed
  • Construction from 6061 Aluminum, Type 3 Hard Coat Anodized for a lifetime of service
  • Fully dehorned for a non-abrasive, comfortable feel
  • MI Lifetime Warranty
  • 100% Made in America - Keeps America Working
  • US Patent Pending


Additional Installation Tips & Instructions
We have found during dozens of installations that there are variations in the Ruger
® firearms. These variations will in no way effect the function or performance of the Ruger® PC9 carbine. Please remember this firearm is a takedown model so perfect alignment may not always be achieved. We have found for best alignment, start by aligning the MI handguard with the top edges of the factory plastic stock. This may take a few attempts and some patience but will produce a very satisfactory result. We have also noticed some variations in the rear sights of these rifles. They are sometimes not installed perfectly straight to the bore. This can be corrected by removing the peep sight portion and straightening out the base. Some rifles will also show a left or right cant with the whole barrel assembly when locked into place. You can see this by looking from the rear of the gun and using the top rail as a reference surface. Neither the function of our handguard or the guns performance will be effected by these slight alignment variations of the factory manufactured firearms. On a final note if after installing the handguard on your firearms you still have any play please check that the tension adjustment ring is properly adjusted on your rifle. Additional information and photos can be found on our website.

Only compatible with new Ruger® PC9™ 9mm/.40 cal Take Down carbine models with plastic forearms

Magpul® and M-LOK™ are trademarks of Magpul Industries Corp

Ruger®, PC9™ Carbine, 10/22 TakeDown®, 10/22®, and Ruger Precision® are trademarks of Sturm, Ruger & Company, Inc.
Midwest Industries PC9 M-LOK Hand Guard

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 4 Write a review »

  0 of 0 people found the following review helpful:
5 of 5 Prompt, Efficient and Courteous April 9, 2021
Reviewer: Charles  
You are prompt, efficient and courteous. You sell quality parts which never have installation problems.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 MI Extended M-Lok 14" Hand Guard July 30, 2020
Reviewer: Charles  
As usual, you shipped my order quickly, even though I expected to wait because it was “out of stock” on your website. The nice cardboard packaging is a nice step up from the “hanging bag” the fore end for my M4 came in a few years ago. The instructions were easy to follow, and installation was easy. I highly recommend using a ft./pd. torque wrench for installing this as directed in the instructions. So far I’ve fired a couple hundred rounds of various weights and types of ammo, and the fore end is still tight and secure. I’ve mounted a light and a small hand stop, and the M-Lok rails fit perfectly. There are no rough edges, and the finish is easy on the hands. I’m looking forward to purchasing your chassis for my Ruger PC9 to complete the set.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
5 of 5 Excellent product!!! July 30, 2020
Reviewer: Bart Watkins from Leeds, AL United States  
Absolutely would purchase again!!
Lightweight, good looking & super easy to install. Great great product. Highly recommend!!

Was this review helpful to you?

  7 of 7 people found the following review helpful:
5 of 5 Love it January 10, 2020
Reviewer: Anthony Abbot from Long Pond, PA United States  
Easy to install and fit/finish looks great.
Be prepared to remove the front factory sight to install the 14" version. Note that the screws in the sight are star not hex. Dont mess up your srews. Front sight fits back in perfectly.
Super satisfied

Was this review helpful to you?