Home > Gun Type > IWI Accessories > Galil ACE Products > 7.62x39mm Variants >

MI-GACEP
MI Galil Ace 7.62X39mm Pistol Length Handguard, M-LOK(TM) compatible

MI-GACEP<br>MI Galil Ace 7.62X39mm Pistol Length Handguard, M-LOK(TM) compatible


 
Our Price: $139.95

Stock Status:In Stock

Product Code: MI-GACEP
Qty:

 
  • Length 6.25 inches/ Width 1.64 inches/ Weight 4.3 oz
  • No gunsmith easy install
  • Slim 1.6 width gives your Galil a great ergonomic feel
  • M-Lok™ compatible slots for maximum flexibility of additional accessories in many locations
  • Anti-rotation QD sockets for easy sling attachment
  • Includes one five slot M-Lok™ compatible rail section
  • All hardware and tools for installation are included
  • Lightweight, rugged construction of 6061 T6 aluminum, Mil-spec hard coat anodized for a lifetime of service
  • Patent pending
  • 100% Made in the U.S.A., MI Lifetime Warranty


-Only compatible with Galil Ace Pistols with a smooth center section between the gas tube and barrel

-If your pistol has a threaded center section please order the MI-GA556P hand guard

If you have any questions please give us a call at the shop 262-896-6780


M-Lok™ is a trademark of Magpul Industries Corp

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 6 Write a review »

  2 of 2 people found the following review helpful:
 
5 of 5 Great product, great customer service May 18, 2020
Reviewer: Travon BARRINO  
I ordered this handguard for my Galil 7.62x39 pistol. What I didn't know, is that IWI manufacturers 2 different handguard mounts for the 7.62 x 39....but Andy fixed my issue in a matter of minutes and shipped me the new handguard needed....this was not a mistake on Midwest's end, it is simply a manufacturer issue.....Its probably best you remove your factory handguard before you oder, just to be sure u get the correct setup....The shipping was fast and the product is top notch

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
5 of 5 5 stars for the handguard and for Midwest May 31, 2019
Reviewer: John from SC United States  
First...let me say that Andy at Midwest got me straightened out quickly!  Second...when I ordered the 7.62 pistol handguard, I didnt really read the reviews (my issue is similar to another review) because I knew that I wanted Midwests version. I ordered the MI-GACEP for the 7.62 pistol and when I received it, I saw a problem...GACEP has the one through bolt design...my 7.62 pistol has the two bolt handguard design (bolt attaches to the gas block from each side). They sent me the MI-GA556P version. This product is located under the 5.56 link but it works perfectly on my 7.62 pistol. IWI has both the one bolt and the two bolt versions floating around for the 7.62 pistol (not sure if this is also true for the 5.56 versions). If you know you have the two bolt version, order the 5.56 pistol, MI-GA556P.  

Third...the handguard is very nice, lightweight and easy to install and the price cant be beat! 5 stars for the handguard and also 5 stars for Midwests customer service!

Was this review helpful to you?

  3 of 3 people found the following review helpful:
 
5 of 5 Check your handguard prior to ordering!! January 30, 2019
Reviewer: Sam M. from NM United States  
So first off I cant say enough about John and Andy at MI. Their customer service is second to none. Long story short there are TWO different style IWI trunnion/gas blocks and you HAVE to specify which style you have when you order a MI handguard. If you remove one long bolt from your ACE handguard you have a through hole trunnion/gas block. If you remove TWO short bolts (one on either side) you have a threaded trunnion/gas block. One MI handguard comes with one long bolt to accommodate the through hole trunnion/gas block and the other MI handguard comes with TWO machine screws AND spacers to secure the handguard to the threaded style trunnion/gas block. They resolved my issue faster than any other company I have ever worked with. Definitely will be buying more goodies from MI!!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Galil Ace pistol handguard October 10, 2018
Reviewer: DALE MIMS from RENO, NV United States  
My new Galil Ace Pistol in 7.62x39 was awesome in every way except for the bulky and rattling handguard. This MI handguard corrected that problem. It's slimmer and looks excellent! The original was plastic all around a quad rail with a heat shield inside of that so I did have concerns with heat with minimalist design of the MI. Shot it yesterday and no issues at all and with the open design the barrel cools faster. Love this product!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Wow what a difference September 18, 2017
Reviewer: Charles Allred from Castle Rock, CO United States  
This rail made my Galil Ace pistol feel so much lighter and slimmer!!!was a breeze to install also.the free threadlocker was a nice touch too.thanks MI

Was this review helpful to you?

View All Customer Reviews